Suitable for use in bridges, construction projects, etc. Rebar of
any shape 6-40mm, 6-32mm rebar bending, so very popular in the
factory prefabrication of buildings and bridges, also in the
construction workers' business area, we are Professional factory
manufactures bending and cutting steel machines. Since we are a
factory outlet, we have high cost performance and affordable
prices.
Advantages
1. This type of bending machine adopts a fully enclosed gear box,
which will not cause deformation even under heavy load conditions,
and will not cause oil leakage when lifting the machine.
2. Advanced design, strong and reliable, compact structure, simple
operation, safe and durable, stable performance.
Special use of thick steel plate, high rigidity disc and iron rod,
high power, medium speed national standard high quality electronic
motor, to ensure a more stable performance.
3. Fully enclosed gearbox, ultra-low noise, with speed adjustment
device, easy to operate.
4. Ultra-high hardness accessories, adjustable baffles, to ensure a
longer service life.
5. The foot switch control switch allows you to easily perform a
single operation to obtain a bend discount.
6. Needle plate, can adjust the angle between 0-360 degrees, more
convenient and convenient.
7. Adopting international standard copper motor motor and dustproof
copper motor, the service life of the steel bar bender is
relatively long, and it can work continuously for a long time.
8. Dust brake motor and two limit switches ensure the accuracy of
the bending angle after stopping and restarting.
9. Gears: Gear shafts, work plates, limiters, pile heads and pile
heads are made of high-quality alloy steel, after appropriate heat
treatment (quenching/tempering/high frequency), to ensure a heavy
load and long-term working life.
10. Pin type discs and movable saddles for precise adjustment of
the bending angle.
11. The fully sealed gear box is used to separate the gear box from
the working disk so that the gear box does not deform during
operation and there is no leakage of the oil in the gear box. Alloy
tool steel gears and work plates are forged and quenched.
Technical Parameters
| Technical parameters of GW series steel bar bending machine |
| Model | GW40 | GW45B | GW50 |
| Bending Diameter | Ordinary carbon steel≤30mm Class III rebar≤28mm | Ordinary carbon steel≤40mm Class III rebar ≤32mm | Ordinary carbon steel≤50mm Class III rebar ≤36mm |
| Operation disc spec | Φ350mm | Φ350mm | Φ400mm |
| Axis Rotate speed | high speed:9.63r/min low speed:4.68r/min | high speed:9.63r/min low speed:4.68r/min | 2.685r/min |
| Motor power | 3kw | 3kw | 4kw |
| Motor Rotate speed | 1429r/min | 1429r/min | 1400r/min |
| Overall Dimension | 88x76x79cm | 87x76x71cm | 85x83x83cm |
| Whole Weight | 220kg | 241kg | 320kg |
