Customized AC electric vibration motor/220v 380v durable vibrating
motor
Vibrating Motors Description
1. MV series three-phase asynchronous vibration motor is developed
by our company based on many years' experience in producing MV
series inertial vibrators.
2. MV series three-phase asynchronous vibration motor is a
general-purpose excitation source for various types of machinery,
such as vibrating feeder, vibrating conveyor, vibrating ore
concentrating machine, vibrating falling machine, vibrating
screening machine, vibration anti-blocking device of silo. Widely
used in electric power, machinery, building materials, mining,
foundry, grain, metallurgy, chemical, port and other industries.
Vibrating Motors Features
1. The excitation force and power are properly matched, and the
body is light in weight and small in size.
2. Use a smooth rotation to generate vibration force with low
noise.
3. Fully enclosed structure, enclosure protection grade IP54, IP5.
4. It is only necessary to adjust the angle of the eccentric block
to achieve stepless adjustment of the exciting force.
5. The motor vibrators can be combined with multiple machines to
form a variety of vibration forms to meet a variety of operational
requirements.
6. Rich in models, complete specifications, to meet the needs of
all types of vibration machinery work.
7. Long service life, bearing life of 2 poles up to 5000 hours, 4,
6 and 8 poles up to 10,000 hours.
Vibrating Motors Parameters
| No. | Model | Force(KN) | Power(KW) | Weight(KG) | Installation Size |
| A | B |
| 1 | MV40/3 | 0.3 | 0.05 | 4 | 62-74 | 106 |
| 2 | MV60/3 | 0.7 | 0.07 | 4.2 | 62-74 | 106 |
| 3 | MV100/3 | 1 | 0.09 | 4.6 | 62-74 | 106 |
| 4 | MV200/3 | 2 | 0.15 | 6.8 | 62-74 | 106 |
| 5 | MV300/3 | 3 | 0.25 | 9.8 | 90 | 125 |
| 6 | MV400/3 | 4 | 0.27 | 10.3 | 90 | 125 |
| 7 | MV500/3 | 5 | 0.5 | 15.8 | 105 | 140 |
| 8 | MV700/3 | 7 | 0.59 | 16.5 | 105 | 140 |
| 9 | MV800/3 | 8 | 0.7 | 20.6 | 120 | 170 |
| 10 | MV1200/3 | 10 | 0.95 | 21.6 | 120 | 170 |
| 11 | MV1300/3 | 13 | 1.3 | 24.5 | 120 | 170 |
| 12 | MV1600/3 | 16 | 1.54 | 51.6 | 140 | 190 |
| 13 | MV1800/3 | 18 | 1.85 | 52 | 140 | 190 |
| 14 | MV2000/3 | 20 | 2.1 | 51.8 | 140 | 190 |
| 15 | MV2200/3 | 22 | 2.4 | 52.8 | 140 | 190 |
| 16 | MV2300/3 | 23 | 2.4 | 53.6 | 140 | 190 |
| 17 | MV3200/3 | 32 | 2.76 | 96.9 | 155 | 255 |
| 18 | MV4000/3 | 40 | 2.9 | 107 | 155 | 255 |
| 19 | MV5000/3 | 50 | 4 | 112 | 155 | 255 |
| 52 | MV60/3M | 0.7 | 0.08 | 4.5 | 62-74 | 106 |
| 53 | MV100/3M | 1 | 0.1 | 5.1 | 62-74 | 106 |
| 54 | MV200/3M | 2 | 0.13 | 6.8 | 62-74 | 106 |
| 55 | MV50DC-24 | 0.5 | 0.1 | 4.5 | 62-74 | 106 |
| 56 | MV200DC-24 | 2 | 0.16 | 6.5 | 62-74 | 106 |
FAQ
Q1: What is the reason for the small amplitude of MV
electromagnetic vibration feeder?
A: The silo pressure in the feeding system is too high. The
solution is to make a chute under the silo to excess the material
to the feeder chute and reduce the pressure of the silo pressure on
the feeder.
B: The air gap of electromagnetic vibration feeder may change
during transportation. Release the two screws that fix the core and
adjust the air gap between the core and armature to about
Q2: Solution to burnout of drive motor of screw feeder?
A: There are hard or small iron blocks mixed in the materials
transported by the screw feeder, the cutter is stuck, the electric
current increases sharply, and the motor is burned. The treatment
method is to avoid the small iron blocks entering and to make the
cutter and the casing adhere to certain voids.
B: If the material is too large, the motor will be heated and
burned. The treatment method is to feed uniformly and send the
material to the end when the machine stops.
